Discontinued
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
Rack mountable power supply for Lightware interfaces
Power supply is the heart of all electrical devices, the core of any secure and reliable system.
4K HDMI Input Board
25G-8HDMI2-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including 3D functions between the endpoints.
USB KVM layer
With the USB KVM option, users can utilize the 25G Hybrid signal management for KVM matrix purposes. Up to 160 computers can be controlled by up to 160 operators. 25G allows point to point control. This method allows multiple operators to control one single computer or one operator to control multiple computers.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
4K Multimode Optical Input Board
25G-8OPTM2-IB-NT is a new 4K compatible fiber optical input board for the 25G router family. These optical boards can extend up to 240m distance over multimode fiber.
DVI-D Single-Link Input board
The MX‑DVID‑IB Input Board has eight input channels for DVI signals.
CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders
WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.
Connector Size DVI Optical Extender with HDCP
DVI-HDCP-OPTS-TX90 is a small Single Mode DVI optical extender for HDMI 1.3 signals with HDCP, for ranges up to a 10 Km. Video signals are transmitted over one Singlemode 9/125 fiber cable. The reinforced housing and ports of these units assure operation safety and security.
4K Singlemode Optical Input Board
25G‑8OPTS2‑IB‑SC is a 4K compatible fiber optical input board for the 25G router family. These optical boards can extend up to 10.000m distance with singlemode fiber technology. The OPTS technology provides a transparent medium for all existing video, audio and control signal formats according to the 25G multilayer architecture (Video, Audio, Ethernet,USB KVM, RS‑232, IR and CEC transmission), and allows the extension from MODEX transmitter units.
DVI Matrix Switcher
The MX12x12DVI‑Plus cost‑effective matrix switchers range from 12 input 12 output. The Plus series switchers are based on the Slim matrices with the added benefits of the integrated power supply insuring reliable performance in the most harshest environments. The 7 inch depth, 4 RU high body and low noise fan design makes it ideal for many space and noise sensitive applications.
Fiber optical Input board for Single-Link DVI-D signal extension
MX‑DVI‑OPT‑IB offers an extremely long, 2500m distance extension over a single Multimode fiber for Single‑Link DVI signals on eight channels.
Dual-Link DVI Fiber Extender
Designed for professional rental use, the DVIDL‑OPT‑TX200 and DVIDL‑OPT‑RX100 extender pair can transmit Dual‑Link DVI signals over two multimode fiber cables for up to a 2500 meter distance. Neutrik OpticalCON DUO are compatible with industry standard LC Duplex fiber cables.
4K HDBaseT™ Input Board with Digital Audio and PoE
Featuring eight HDBaseT™ input ports, this board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters.
DVI extender over CAT5 ... CAT7 twisted pair cable
The TP series extenders offer cost‑effective twisted pair extension transmitting Single Link DVI‑D signals over a single CATx cable.
Pro Series DVI Switcher
MX8x8DVI‑Pro is cost effective solution for routing DVI signals on eight input / eight output.
Twisted Pair Input board for DVI over CAT5...CAT7 cables
MX-DVI-TP-IB+ Input board has 8 dual Twisted Pair Input channels accepting DVI-D signals. Each Input port incorporates two RJ45 connectors that have built-in Cable Extender and an individual EDID Manager for setting EDID information and keeping sources continuously active. Using a supplied external 12 Volt DC power supply, this board is able to remotely power the connected compatible TP transmitters such as the DVI-HDCP-TP-TX50.
CAT5, CAT6 and CAT7 twisted pair HDMI extender
This entry level HDMI extension system transmit HDMI signal formats over dual CAT cable up to a 65 meter distance at 1920x1080p Full HD. HDMI 1.3a signals are fully supported with or without HDCP encryption.
4K HDBaseT Output Board with PoE
Featuring eight HDBaseT™ output ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant 3rd party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.
Professional grade CAT5, CAT6 and CAT7 Twisted Pair HDMI extender
HDMI‑TP 200 series extenders can transmit HDMI or DVI‑D signals over two CATx cables, fully supporting HDMI 1.3a signals with or without HDCP encryption.
Application‑Specific Modular Extenders
HDMI and HDCP Compliant Fiber Optical Output Board
MX-HDMI-OPT-OB offers an extremely long, 2500m extension range over a single Multimode fiber for HDMI, DVI, VGA signals on eight channels supporting 4K resolution and 3D formats.
25G 4K DVI-D Input Board with Analog Audio and KVM
25G-8DVID2-A3K2-IB provides fully transparent HDMI 1.4 connectivity to the latest high-end digital sources including 3D functions between the endpoints.
Consumer Electronics Control layer
Consumer Electronics Control (CEC) is also commonly used for remote control based applications like IR. Third party control systems can also send CEC control commands to endpoints turning them on and off or switching their inputs. CEC was introduced by HDMI standard, and is a bi‑directional CEC channel.
We can link sources and destinations via CEC communication while the router itself can initiate its own commands for example: „SYSTEM ON” or „STANDBY” commands.