Discontinued

IR layer

Infrared is commonly used for remote control based applications. This Media Layer helps maintain the structure of the overall AV system. Third party control systems may send IR control commands to endpoints turning them on and off or switching their inputs.

CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders

WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.

Optical Splitter with Two Identical Outputs

SP2OPT distributes one optical signal to two identical outputs. No power supply is required as the devices have no active electrical parts.

4K Multimode Optical Input Board

25G-8OPTM2-IB-NT is a new 4K compatible fiber optical input board for the 25G router family. These optical boards can extend up to 240m distance over multimode fiber.

Fiber optical Output board with Pixel Accurate Reclocking

MX‑DVI‑OPT‑OB‑R Output Board provides extremely long, 2500m extension and reclocking for DVI‑D signals over Multimode fiber on eight channels.

CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders

WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.

4K Multimode Optical Output Board

25G-8OPTM2-OB-SC is a new 4K compatible fiber optical output board for the 25G router family. 

Dual-Link DVI Fiber Optical Input Board

MX‑DVIDL‑OPT‑IB offers an extremely long, 2500m distance extension over a duplex Multimode fiber for Dual‑Link DVI signals on four channels.

Twisted pair wallplate and floorbox transmitter

UMX‑TP‑TX100 is a versitale transmitter which provides analog and digital audio and video connectivity from a remote point over Dual CAT cable.

DVI extender over CAT5 ... CAT7 twisted pair cable

The TP series extenders offer cost‑effective twisted pair extension transmitting Single Link DVI‑D signals over a single CATx cable.

4K Singlemode Optical Output Board

25G‑8OPTS2‑OB‑SC is a 4K compatible fiber optical output board for the 25G matrix family. These optical boards can extend up to a 10,000m distance using singlemode fiber technology. The OPTS technology provides a transparent medium for video, audio, Ethernet, USB KVM, RS‑232, IR and CEC data according to the 25G multilayer architecture and allows the extension
to MODEX receiver units.

DVI‑HDCP‑TP and HDMI‑TP are deep color extenders which can transmit HDMI or DVI‑D signals over two CATx cables, fully supporting HDMI 1.3a signals with or without HDCP encryption.

4x4 DVI Matrix Switcher

MX4x4DVI is a four input / four output DVI crosspoint matrix switcher supporting all DVI‑D resolutions coming from PC video boards or other DVI‑D sources.

Fiber optical Output board with Pixel Accurate Reclocking

MX‑DVI‑OPT‑OB‑R Output Board provides extremely long, 2500m extension and reclocking for DVI‑D signals over Multimode fiber on eight channels.

Single Fiber HDMI 1.3 Optical Extenders with Bi-directional RS-232

HDMI-OPT-series are optcal extenders transfering HDMI 1.3 with embedded audio, DVI 1.0, HDCP and bi-directional RS-232 signals over one multimode fiber to a range of up to 2500 meters.

4K HDBaseT Output Board with Analog Audio and PoE

Featuring eight HDBaseT™ output ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant 3rd party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.

Single Fiber HDMI 1.3 Optical Extenders with Bi-directional RS-232

HDMI-OPT-series are optcal extenders transfering HDMI 1.3 with embedded audio, DVI 1.0, HDCP and bi-directional RS-232 signals over one multimode fiber to a range of up to 2500 meters.

Matchbox-Size Power and RS-232 Injector

BR‑TP‑COM is a matchbox size DDC cable breakout, which has two RJ‑45 connectors: a serial RS‑232 control port and a locking DC connector. The device doesn’t need to be supplied with power unless it is intended to work as a remote power source. In this case it can transfer +12V through the CATx cable for connected devices.

DVI-I Input Board

MX‑DVII‑HDCP‑IB is an all‑around Input Board which was designed to handle analog VGA, YUV, digital DVI and HDMI 1.3 video signals with HDCP compliancy.

CAT5, CAT6 and CAT7 Active Twisted Pair Wall Plate extenders

WP‑DVI‑HDCP‑TP and WP‑HDMI‑TP 50 transmit HDMI or DVI‑D signals over two CATx cables. They fully support HDMI 1.3a signals with or without HDCP encryption.

25G Hybrid Matrix Frame with 160x160 Crosspoint

The 25G frames can transmit video signals up to 4K resolution, support all 3D formats, handle forward audio, transmit USB‑KVM, Ethernet, bi‑directional RS‑232/RS‑422, IR and CEC signals. The intuitive graphical user interface offers easy and user‑friendly control accessing all available features. Advanced EDID Management is included in the frame which is also HDCP compliant.

Analog/Digital Video and Audio Extension over Multimode Fiber

UMX‑OPT‑TX150R is a versitale optical transmitter which provides long distance connectivity for analog and digital audio and video up to a distance of 2500 m. The extender was designed to handle VGA, DVI‑I and HDMI 1.3 signals with analog stereo, 5.1 S/PDIF and 7.1 HDMI embedded audio. Analog video signals are converted into digital formats with digital or digitized analog audio becoming embedded in the video stream. The UMX‑OPT‑TX150R handles HDCP encryption and includes an HDCP enable/disable setting option.

Twisted Pair HDMI Output board for CAT5...CAT7 cables

MX-HDMI-TP-OB is an 8 channel Twisted Pair Output board for dual CAT5, CAT6 or CAT7 cables, extending HDMI and DVI signals with HDCP compliance.

25G 4K DVI-D Single-Link Input Board

25G‑8DVID2‑IB provides fully transparent HDMI 1.4 connectivity to the latest high‑end digital sources including 3D between the endpoints.